Restoration Water Damage 101
Flood problems can occur any time, and for a number of
reasons. The sink upstairs may overflow,
a pipe in the basement may burst, or Hoover dam could collapse and bury your
home under 20 feet of water. The damage
left behind can be devastating to any homeowner, who is now convinced that their
home and life is destroyed forever.
It doesn’t have to be the case, though. Water damage restoration is not only
possible, it is recommended, especially if you act quickly to minimize the damage.
Water does a lot of damage right away, but can continue to cause difficulty for
as long as it remains untreated.
You’ll need to wait until the flood waters have receded, of
course, and then shut off all electricity and gas to your home. Check for structural stability before
entering; you don’t want to get caught in a collapse.
Wear protective clothing when working in flood waters. Long sleeves and pants, waterproof boots, and
eyewear are recommended. 
You’ll need to remove all loose items and furniture from the
damaged area. Electrical appliances
should be checked out by an electrician before being operated again.
Excess water will have to be extracted from the home, using
wet-dry vacuums or gas powered submersible pumps. Water damage restoration equipment can be
rented from your local water restoration company.
Secondary drying is done by opening all windows and using
fans or blowers to circulate as much air as possible. Carpets will need to be taken up so the floor
beneath can be treated. Make sure all
surfaces are dry before continuing with any repair work.
Call your local restoration water damage company today for
prompt courteous service. 
Share This Page
|
